Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepalives from Cat 6K Supervisor.

hi

i did upgrade to WiSM from v5.1 to V6 then i see this log

%WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepalives from Cat 6K Supervisor.
please advice

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost kee

Upgrade to 7.X as per Cisco recommendations.

8 REPLIES
Hall of Fame Super Gold

Re: %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost kee

Upgrade to 7.X as per Cisco recommendations.

New Member

Re: %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost kee

hi ,
i will upgrade it to 7.0 but it v7.0 stable ????

New Member

Re: %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost kee

hi leola ,
also the Emergency version is  v5.1 do I need to upgrade it (if possible to new v)

please advice

Hall of Fame Super Gold

Re: %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost kee

Cisco, for the past few months (more than 6 months), has been recommending everyone to stay away from the 5.X code.  Some of us in the NetPro forums has considered this version to be the "lost-cause".

There is no such thing as a "stable" code.  There is, however, a code with fewer bugs.  7.X is the way to go. 

New Member

%WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepali

I have been on the 7.0.116.0 for a while, and recently upgraded my Sup 720's to 12.2(33)SXJ1, and have started seeing these messages.

Can we get something other than "upgrade" on this?

New Member

Re: %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost kee

I know this is an old thread but I have just upgraded a WiSM2 to version 7.4.110.0 in a Cat6509E and I am getting this same log continuously.  Wireless services seem to be woring ok with the exception of very few clients spontaneously disconnecting at random intervals.

*wcpTask: Apr 25 14:15:28.386: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:14:28.370: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:13:28.354: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:12:28.338: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:11:28.322: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:10:28.306: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:09:28.290: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

Would love to know if I need to react to this message.

New Member

Hi,Same message from WISM2

Hi,

Same message from WISM2 running 7.6.120.0

Any idea? In the meantime, I opened a TAC case.

 

Thanks and regards,

Vincenzo

New Member

any luck on your TAC case?

any luck on your TAC case?

1428
Views
0
Helpful
8
Replies