This configuration is not recommended because of shared common ports used by both service. There are a lot of hidden port values that can not be modified. I've tested this personally and having WCS and ACS on the same box is not a reliable setup.
Note : If that helps then please mark it resolved so that other can benefit.
I'm running the free vmware server on a shuttle PC (SN27P2) athlon based (AMD Athlon 64 X2 socket AM2 3800+) with 4GB of ram however the vitual machine only gets 1GB of ram. And is only using 1 processor.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...