Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WCS Features and ordering info

Hello!

as described in:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd802570d0.html

Cisco WCS Plus

• Supports deployment of Cisco WCS on a single server

• Supports mobility services enablement, high availability, and the ability to track the location of a single Wi-Fi device or tag on demand

and

Cisco WCS Location

• Supports deployment of Cisco WCS on a single server

• Includes location services to support tracking of a single Wi-Fi device on demand or expanded location capabilities by adding a Cisco Wireless Location Appliance.

• Cisco WCS Location must be installed to support deployment of a Cisco Wireless Location Appliance.

does it mean, that this licences allow me to track clients by WCS interface without Location Appliance deployment?

What are the diffirences between PLUS & LOC licences? (There are no differences between WCS-STANDARD-K9 + WCS-APLOC-50 (or AIR-WCS-WL-1.0-K9) and WCS-STANDARD-K9 + WCS-PLUS-50, instead of HA on PLUSlic, isn't it?)

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: WCS Features and ordering info

You can track a single client by drilling down to that client without the location appliance.

Adding the location appliance allows you to track multiple client/tags/rogues on the maps you have configured.

Base was without location.

Plus ( rename of location ) is Base + Location.

These are old part numbers and should not be used:

AIR-WCS-WL-1.0-K9 ( Windows Location )

1 REPLY
Cisco Employee

Re: WCS Features and ordering info

You can track a single client by drilling down to that client without the location appliance.

Adding the location appliance allows you to track multiple client/tags/rogues on the maps you have configured.

Base was without location.

Plus ( rename of location ) is Base + Location.

These are old part numbers and should not be used:

AIR-WCS-WL-1.0-K9 ( Windows Location )

191
Views
0
Helpful
1
Replies