cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
371
Views
0
Helpful
1
Replies

WCS --> WLC "Device un reachable"

yprasannas
Level 1
Level 1

Added WLC to WCS. Rebooted WLC from WLC and WCS cant reach WLC eventhough I can ping and access WLC. Verified SNMP and looks fine. Happened on two WLC's. I am waiting for almost 2 hours for WCS to talk WLC...

1 Reply 1

jsivulka
Level 5
Level 5

Please update the following informations

'show run-config' from the WLC and 'show run' from Switch connected to WLC while specifying the ports of Switch that connect to WLC in 2 separate text files.

=> Show msglog after the problem happens.

=> Check if there is crashes file available (WLC GUI ->Management ->Controller Crash)

=> 'show port summary' from the WLC when such problem happens.

=> 'show ip int br' from Switch connected to the WLC when such problem happens.

=> 'show arp switch' form WLC when such problem happens.

=> 'show arp' from Switch when such problem happens

The following URL will help you:

http://www.cisco.com/warp/public/707/cisco-amb-20070412-wlc.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card