I am trying to figure out the process of configuring WDS. I am looking at this guide and it assumes that I am using Cisco ACS which is not the case here.
Let's say I have two APs: WDS-AP and Infrastructure-AP. The guide says that I need to create an account for the Infrastructure-AP on the Cisco ACS server. So, in the current scenario with using Windows NPS, do I create an account for the infrastructure AP on the WDS-AP? If yes, how do you do that?
If that's the case, you would only need to create a policy in NPS for the WDS-AP, not for the infrstructure APs, correct?
when you say "create an account in the DB for the WDS user" what DB and what WDS user are you referring to?
DB as of the DB of the WDS AP?
WDS user - who is that? Is it the infrastructure AP? Or, is it the end user?
when you say "You can also use the WDS AP as a local radius for the infrastucture authentiation" - are you referring to using local end user accounts instead of active directory accounts? if yes, that is not going to work for us because we actually are buying around 30 APs for a couple hundred users. That scenario from my post above was with only 2 APs for the sake of simplicity.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...