This is the setup. Layer 3 Cat 4000 with VLAN interface 200 ip address 192.168.100.1
350 bridge connected to port on cat on vlan 200 ip address 192.168.100.2
remote 350 ip address 192.168.100.3
bridge connected to another cat 4000 with VLAN interface 200 ip address
remote bridge is connected to second cat4000 on vlan 200
before the bridges associate, I can ping the bridges from each catalyst and I can web into them. After association, traffic is passed and all works well, but I can no longer ping or web into the bridges. What am I doing wrong???
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...