I am unable to set the web authencation. I have a 4402 and 1130abg I am using the controller's page for auth. No layer 2 auth. The client gets the ip the ssid shows as unsecured. it does not takes me to the auth web page.
What has to happen is when the user obtains an ip address and then opens a browser, the WLC looks at the web site (default homepage) the user is trying to access and if the WLC is able to resolve via DNS, then you will get the webauth page. If can't resolve via dns, then you will get page cannot be displayed.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...