cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
509
Views
0
Helpful
4
Replies

WEBGUI 3850 SWITCH

dnspacket1
Level 1
Level 1

Dears,

I have cisco 3850 switch with with ios      3.03.01SE .

How we can enable webgui for 3850s. i referred the below link to do this activity

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/system_management/configuration_guide/b_sm_3se_3850_cg_chapter_010101.html

There is inbuilt wireless controller on this switch.

I am unable to get any of the options as the wireless gui webpage itself is not coming.

Please help me how we can do this configs

Regards

Deva

4 Replies 4

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI Deva,

Onboard web GUI requires Cisco IOS XE Release 3.2.2SE or later.

Go to CLI and congfigure these:

If you want unsecured (http://) web access, go to conf t and enter:

ip http server

If you want secure (https://) access, go to conf t and enter:

ip http secure-server

Regards

Dear Sandeep,

I am able to access the switch. But I am unable to access the WLC settings.

But WLC is already configured and APs are associated on it.

But its configured without service port..

HI Deva,

Di d u tried thsi:

  The GUI can be accessed via https:///wireless

Check this:

https://supportforums.cisco.com/docs/DOC-34430

http://mrncciew.com/2013/09/29/getting-started-with-3850/

Regards

Hi

Try different browser & see. Below should work

https:///wireless

HTH

Rasika

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: