Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WEBGUI 3850 SWITCH

Dears,

I have cisco 3850 switch with with ios      3.03.01SE .

How we can enable webgui for 3850s. i referred the below link to do this activity

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/system_management/configuration_guide/b_sm_3se_3850_cg_chapter_010101.html

There is inbuilt wireless controller on this switch.

I am unable to get any of the options as the wireless gui webpage itself is not coming.

Please help me how we can do this configs

Regards

Deva

4 REPLIES
VIP Purple

Re: WEBGUI 3850 SWITCH

HI Deva,

Onboard web GUI requires Cisco IOS XE Release 3.2.2SE or later.

Go to CLI and congfigure these:

If you want unsecured (http://) web access, go to conf t and enter:

ip http server

If you want secure (https://) access, go to conf t and enter:

ip http secure-server

Regards

New Member

WEBGUI 3850 SWITCH

Dear Sandeep,

I am able to access the switch. But I am unable to access the WLC settings.

But WLC is already configured and APs are associated on it.

But its configured without service port..

VIP Purple

Re: WEBGUI 3850 SWITCH

HI Deva,

Di d u tried thsi:

  The GUI can be accessed via https:///wireless

Check this:

https://supportforums.cisco.com/docs/DOC-34430

http://mrncciew.com/2013/09/29/getting-started-with-3850/

Regards

VIP Purple

Re: WEBGUI 3850 SWITCH

Hi

Try different browser & see. Below should work

https:///wireless

HTH

Rasika

219
Views
0
Helpful
4
Replies