Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WGB350 issue

I've a WGB350 associated (no encryption at the moment) to an AP350 :

host ------ WGB350 - - - - - AP350 ------ router

x.x.x.99 x.x.x.250 x.x.x.217 x.x.x.1

The role of the AP is "root", and the WGB it's seen as a "repeater".

I didn't configure any route neither on the WGB nor on the AP.

From the router I can ping the WGB and vice versa, but the host is unreacheable, and so is the AP and the router from the host.

What's the mistake?

TIA.

Antonio

  • Getting Started with Wireless
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: WGB350 issue

Try upgrading the WGB to the latest firmware and see if that fixes your issue. You may even reset the WGB back to the factory settings and reconfigure it just to make sure the configuration is correct.

1 REPLY
Bronze

Re: WGB350 issue

Try upgrading the WGB to the latest firmware and see if that fixes your issue. You may even reset the WGB back to the factory settings and reconfigure it just to make sure the configuration is correct.

154
Views
0
Helpful
1
Replies