Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

What is the meaning: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.

What is the significance of this event & state combo? Is there a source to check what different event numbers and state numbers mean?

Attached is part of a 1522 AP registration output reflecting this error. I've seen this event on some other 1552 series APs I recently deployed. The APs register to the WLC. And I've seen this error whether the AP registers to the WLC via DNS or Option 43. It looks to be related to issues processing capwap control messages and processing encrypted capwap packets from the WLC.

 

Translating "CISCO-LWAPP-CONTROLLER.XXXXX"...domain server (XXX.XXX.XXX.XXX) [OK]

Translating "CISCO-CAPWAP-CONTROLLER.XXXXXX"...domain server (XXX.XXX.XXX.XXX) [OK]

*Mar  1 00:02:34.767: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
*Mar  1 00:02:34.767: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
*Mar  1 00:02:34.767: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Mar  1 00:02:34.767: %CAPWAP-3-ERRORLOG: Failed to process timer message.
*Mar  1 00:02:35.903: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar  1 00:02:45.959: %CAPWAP-3-ERRORLOG: Selected MWAR 'WLC NAME'(index 0).
*Mar  1 00:02:45.959: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jul 29 08:35:48.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: <WLC IP> peer_port: 5246
*Jul 29 08:35:48.579: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: <WLC IP> peer_port: 5246
*Jul 29 08:35:48.579: %CAPWAP-5-SENDJOIN: sending Join Request to <WLC IP>
*Jul 29 08:35:48.583: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jul 29 08:35:48.583: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jul 29 08:35:48.583: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jul 29 08:35:48.583: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from <WLC IP>
*Jul 29 08:35:48.835: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jul 29 08:35:48.883: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul 29 08:35:48.971: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller <WLC Host Name>

Everyone's tags (1)
4 REPLIES
New Member

Hi laake9999, What version of

Hi laake9999,

 

What version of code are you running?

You could be hitting:

 

CSCuh46442

Symptom : Cisco lightweight access point displays %CAPWAP-3-ERRORLOG messages when AP associates with the Cisco WLC:

%CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
%CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
%CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
%CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 172.22.170.1
 

Conditions : AP join process.

Workaround : Unknown.

New Member

I'm using 7.4.121

I'm using 7.4.121

VIP Purple

Hi Lakke,Either its a bug or

Hi Lakke,

Either its a bug or normally it happnes when you dont have set correct time and date on Cisco Controller.

 

Regards

Dont forget to rate helpful posts

New Member

Could be a bug, will have to

Could be a bug, will have to look into it. the WLC has the correct time and date.

2088
Views
0
Helpful
4
Replies
CreatePlease to create content