Re: What type of equipment is used to set up a wireless network
Simply use Cisco 1200 series Access points with 802.11g cards in them. place and access point after every quarter mile and make sure each of the Access points are able to talk to each other. There are some other factors aswell that decrease the amount of signals you would expect, like if there is a brick wall coming in between and if its indoor than signals are reduced to about 50%. Try mounting Omni directional Antennas on top of the highest building on Campus. You will have to do some wireless testing and site surveying for this aswell...
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...