07-23-2013 04:03 AM - edited 07-04-2021 12:29 AM
Hi ,
We are using 5508 WLC with software version of 7.4.100.60 . Whether this code will support that ? When we tried LDAP on with port number 389 , we are able to authenticate the user . But with LDAPS on port number 636 we are not getting response from AD?
Any clue on this...
Thanks,
Regards,
Vijay.
Solved! Go to Solution.
07-23-2013 04:32 AM
You can change the port, but you are not changing how it communicates by changing the port. If you search for WLC LDAP Configuration, you will not see any reference to supporting LDAPS. If there was a setting on the WLC to choose to use LDAP or LDAPS, then it would work. You have also tested it and you can see it doesn't work. Sniff the traffic and see if it is secure or not as that will also tell you.
You can alway contact your local SE and put in for a feature request for that.
Sent from Cisco Technical Support iPhone App
07-23-2013 04:23 AM
From what I know, that isn't supported. 389 is the default port used from the WLC.
Sent from Cisco Technical Support iPhone App
07-23-2013 04:27 AM
Hi Scott,
But we have the option to edit the port number while adding LDAP server. Could you please provide the link that LDAPS is not supported by WLC.
Thanks,
Regards,
Vijay.
07-23-2013 04:32 AM
You can change the port, but you are not changing how it communicates by changing the port. If you search for WLC LDAP Configuration, you will not see any reference to supporting LDAPS. If there was a setting on the WLC to choose to use LDAP or LDAPS, then it would work. You have also tested it and you can see it doesn't work. Sniff the traffic and see if it is secure or not as that will also tell you.
You can alway contact your local SE and put in for a feature request for that.
Sent from Cisco Technical Support iPhone App
07-23-2013 05:33 AM
Thanks for the help scott. Will try to check with our local SE.
Regards,
Vijay
07-24-2013 04:01 AM
Hi Scott,
Got confirmatio that LDAP SSL is not supported in WLC . IT will be supported on 7.6 relas
Regards,
Vijay
07-24-2013 04:10 AM
Well... That would be a yet at least I would think or even longer.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: