Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

While i execute this below command the cisco 2504 WLC getting crashed. Cisco Controller) >test capwap encr AP78 disable Dumpi

While i execute this below command in Cisco 2504 WLC getting crashed.

 

Cisco Controller) >test capwap encr AP78 disable Dumping a core. This can take a few minutes...

Controller crashed ....Queue Woken up jiffies = 4294960736

 

Software Failed on instruct

ion at:

pc = 0x104fe898 (cliTestCapwapEncryption+596), ra = 0x10b8d364 (cliTestCapwapEncryption+596)

 

Can any one help me on this.

 

 

 

2 REPLIES

You'll need to open up a TAC

You'll need to open up a TAC case so they can decode the traceback.

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

This is a bug indeed that has

This is a bug indeed that has been identified so, before opening a Cisco TAC case I recommend you to go to the latest version of software (7.4.121.0 or 7.6.110.0) and upgrade the FUS image as well.

 

If you are having the issue on any of these versions then TAC will further investigate this, otherwise, an upgrade is the first thing that we are going to ask you to do.

 

Thank you!

 

Marco Gonzalez

Cisco TAC

470
Views
0
Helpful
2
Replies