Re: why client can't use sametime and download mail

goldtechcco · ‎08-06-2007

when a wireless client join to the WLAN(1200AP(lightweight)+LanController2006+Swith+Router),all of the wireless client can't use sametime ,and user cant download it when the mails are over 3kB.but user can visit all the web information by IP address.

otherwise,if the WLAN is only AP1200(weight)+Swith+Router,user can user sametime and download all the mails.

help me!thx.

thomas.chen · ‎08-10-2007

Check to see if there is any ACL configured for the WLAN . If not configure to allow the traffic. refer URL for more information

http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml#backinfo. If it doesnt work try to upgrade the controller.

goldtechcco · ‎08-12-2007

first thks.

1:there is not any acl configured for the wlan;

2:we have upgrade the controller,but the question still;

3:next is the controller config.please confirm it.

(Cisco Controller) >show running-config

802.11a cac voice tspec-inactivity-timeout ignore

802.11a cac voice stream-size 84000 max-streams 2

802.11a channel global off

802.11a txPower global 1

802.11b cac voice tspec-inactivity-timeout ignore

802.11b cac voice stream-size 84000 max-streams 2

802.11b fragmentation 1272

advanced location expiry tags 1200

advanced location expiry client 150

advanced location expiry calibrating-client 30

advanced location expiry rogue-aps 1200

Cisco Public Safety is not allowed to set in this domain

country CN

dhcp create-scope wireless-dhcp-test

dhcp address-pool wireless-dhcp-test 10.135.30.40 10.135.30.50

dhcp default-router wireless-dhcp-test 10.135.30.254

dhcp enable wireless-dhcp-test

dhcp dns-servers wireless-dhcp-test 10.136.30.201 10.136.30.202

dhcp domain wireless-dhcp-test intranet.icbc.com.cn

dhcp netbios-name-server wireless-dhcp-test 10.136.30.201 10.136.30.202

dhcp network wireless-dhcp-test 10.135.30.0 255.255.255.0

interface create vlan 72 72

interface address ap-manager 10.143.3.250 255.255.255.0 10.143.3.254

interface address management 10.143.3.249 255.255.255.0 10.143.3.254

interface address virtual 1.1.1.1

interface address dynamic-interface vlan 72 10.135.30.250 255.255.255.0 10.135.30.254

interface dhcp ap-manager primary 10.143.3.249

interface dhcp management primary 10.143.3.249

interface dhcp dynamic-interface vlan 72 primary 10.143.3.249

interface vlan vlan 72 72

interface port ap-manager 1

interface port management 1

interface port vlan 72 1

logging buffered 1

mesh security eap

mgmtuser add admin **** read-write

mobility group domain cisco

mobility symmetric-tunneling enable

msglog level critical

network telnet enable

network broadcast enable

network mgmt-via-wireless enable

network rf-network-name cisco

radius auth add 1 10.139.115.3 1812 ascii ****

radius auth add 2 10.11.115.3 1812 ascii ****

radius auth rfc3576 enable 1

radius auth rfc3576 enable 2

snmp version v2c enable

snmp version v3 enable

sysname Cisco

wlan create 2 WPA_PRO TEST2009

wlan interface 2 vlan 72

wlan aaa-override enable 2

wlan broadcast-ssid disable 2

wlan radius_server auth add wlan-id:2 global server index:1

wlan radius_server auth add wlan-id:2 global server index:2

wlan security static-wep-key encryption 2 104 ascii **** 1

wlan security wpa wpa1 enable 2

wlan security wpa wpa1 ciphers tkip enable 2

wlan security wpa wpa2 disable 2

wlan dhcp_server 2 0.0.0.0 required required

wlan enable 2

c.netherton · ‎09-17-2007

I have had similar problem. It only appeared when I changed the default speed settings. WLC was advertising some 802.11 speeds even when they were 'disabled'. Try with all WLAN speeds "supported" and see if problem is still there.

Christopher

goldtechcco · ‎09-28-2007

sorry,can you give me more about the "default speed settings",i have changed some speed ,but the problem is still.

thanks.