Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
I just found out the hard way the 3850 switch doesn't support the 2702AP. Does anyone know why cisco's latest switch doesn't support an up to date AP?
Anyone from cisco care to answer when it might if at all?
What version of IOS are you running? According to the release notes for IOS XE Software-3.6.0E(ED) the 3850 now supports the 2700 series AP.
Release notes found here: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/release_notes/OL3262101.html#pgfId-919177
Ryan is right, IOS-XE 3.6 added following AP support
Support is added to the following APs in this release:
Note The Cisco Aironet 1530 Series APs are supported operating only in Local mode; these APs in mesh mode are not supported.
If you are running this version of software & still cannot register your AP, then attache the AP console output to see what's the reason for failure.
****Pls rate all useful responses ****
Looks like I was too fast venting my spleen, 3.6 does support the 2700, I had that confirmed from cisco.
Pls mark this thread as answered & rate all useful responses
Do you know when the 3650 will be able to support the 2702?
As long as you run IOS-XE 3.6 image on your 3650 it should support it.
**** Pls rate all useful responses ****