11-02-2006 10:52 AM - edited 07-03-2021 01:10 PM
Cisco Aironet 1200 installed on testing network. My laptop is picking signals from 3 other access points, but not the 'TEST' one.
Please find attached access point running-config. Can you help me and please advise why this SSID is not being visible ?
I am aware that the Cisco ACS/AAA portion configuration may need to be fine tuned as well, but regardless on how my ACS is configured I should still be able to see the SSID brodcasted in my laptop, isn't that right ?
Solved! Go to Solution.
11-02-2006 11:05 AM
under your SSID on the DotRadio11 0 interface, add the commadn guest-mode. This allows the SSID to be in the beacon messages so your client can see it.
11-02-2006 11:05 AM
under your SSID on the DotRadio11 0 interface, add the commadn guest-mode. This allows the SSID to be in the beacon messages so your client can see it.
11-02-2006 12:22 PM
YOU RULE !
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: