Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Windows 2000 Looses DHCP Address following Suspend or Hibernation

Upon powerup there is no problem getting DHCP through my AIR-PCM35x: PC Card (PCMCIA); however, upon resumption from hibernation after about one hour the address has vanished. The card is still associated to the AP350. Have tried both re-starting via ACU, ejecting via Plug & Play and even tried an ipconfig /renew. Only a subsequent power cycle works.

These symptoms are evident running Driver 8.2.3.

Advice & Guidance would be much appreciated.

1 REPLY
Bronze

Re: Windows 2000 Looses DHCP Address following Suspend or Hibern

There is a new bundle on the software center that has NDIS driver 8.3 in it. Try downloading the new bundle to see if that resolves your problem. Here is the information for the bundle.

Cisco Aironet Client Adapter Installation Wizard version 1.0 - 802.11b Radio Firmware 5.02.19 or 5.02.20, Windows NDIS Driver 8.3, Aironet Client Utility (ACU) 6.0, Aironet Client Monitor (ACM) 2.0. 03/2003

You can find it at this URL http://www.cisco.com/kobayashi/sw-center/sw-wireless.shtml

196
Views
0
Helpful
1
Replies
CreatePlease to create content