Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WIRED GUEST ACCESS WLC 5508

Hi Guys, 

I've just set up a wired guest access for my HQ but I'm wondering if it is possible to do the same in a branch office because We do not have another controller in this site, could this be accomplished using the wlc of the hq?

Any ideas please.

Regards
Oscar

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

If you have L2 communication

If you have L2 communication between HQ &  BR, this is possible (then you can extend your wired user vlan to your WLC).

Otherwise you have to have a WLC at your branch as well.

http://mrncciew.com/2013/03/26/wired-guest-access/

HTH

Rasika

**** Pls rate all useful responses ****

2 REPLIES
VIP Purple

If you have L2 communication

If you have L2 communication between HQ &  BR, this is possible (then you can extend your wired user vlan to your WLC).

Otherwise you have to have a WLC at your branch as well.

http://mrncciew.com/2013/03/26/wired-guest-access/

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Thanks for your reply Rasika

Thanks for your reply Rasika,

i have a router 3945 with a sre-700 installed (Branch) is it possible to run a vWLC on it to get this working?

 

Thanks so much for your help

Oscar

 

59
Views
5
Helpful
2
Replies
CreatePlease to create content