Here are the answers for your queries please go through and revert
1.Are you running LWAPP?
A: We are running LWAPP
2. You need to be running 4.2.130 on WLC
A: we are running 22.214.171.124 on WLC
3. AC power, injector or switch?
A: we are using AC Power Injector.
For your information we have deployed the wire less network and the configuration has been done, wire less clients are able to access the resources with wireless network.
LAP has got total 6no.s of Radios, out of which 3 no.s of 2.4GHz and other 3no.s of 5GHz , WLC was configured county code as a 'IN'( India), at the moment we are able to use only 2.4 GHz radio in the LAP with 802.11n standard supported wireless adapter (Laptop)
The customer requirement is that, is there any possibility to use even 5GHz radios also in the access point, so that they can Improve wireless network performance if it is not possible kindly let us know the reason.
And also please clear the following queries.
1. Any configuration required in WLC or access point to have 300 Mbps downlink/uplink to a wireless client?
2. Which wireless adapters (like intel) in laptops will support the 802.11n - 300 Mbps downlink/uplink?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...