I'm prett new to setting up Cisco WAP. I have tried to copy the config from a working one in another other and changed it to suit my own. I'm attaching a config. The problem is that the AP doesnt automatically get picked up by Wireless cards and when i manually set it up, i get authentication issues - DOG11-7-Auth_Failed from the station MAC-ADDRESS
Any idea? I am confused how the Vlan i have set it up on communicates. Please help?
Just glancing over i dont see anything that sticks out, have you reference the associated log files on your radius/acs boxes for failed attempts? Also appears your authenicating via mac address so possibly the mac addy isnt present as an authorized device?
but if i put it in guest mode, then i can see the secured network but can't log on to it. When i try to connect it just times out trying. On the client, it doesn't seem to be able to exchange keys,etc. this is where I am in the dark and have difficulty figuring it out.
I've checked the ACS box and it shows on passed authentications that its fine. I just can't get up user authentication box at this point on the client.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...