Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Wireless AP 1230 and Peap authentication

I have access point running on 12.2(13)JA3 and a gateway 450 with an Inter pro/wirelss 2100 and all is fine when using LEAP. Once I change to PEAP and install the certificate it fails to authenticate and the wireless keeps failing/authentication/disabling.

1 REPLY
New Member

Re: Wireless AP 1230 and Peap authentication

The best way to start testing PEAP when coming from LEAP is to uncheck server certificate validation. Depending on the client you're using there's an option for this. WinXP has it under the advanced area of authentication. Uncheck that, then test your PEAP. IF that works, then you know you can focus on the certiciate mutual authentication portion of your deployment.

176
Views
0
Helpful
1
Replies
CreatePlease to create content