Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Wireless AP - Not able to ping default gateway from wireless client

I hv configued AP 1310 in Root bridge with client mode. BVI interface has been configured with static ip and the default gateway has been configured

Wireless client successfully get's the ip address from DHCP server on network through bridge but not able to ping the gateway or any other ip on the network.

Wireless client is successfully able to ping the bridge ip once it get ip address from dhcp server.

At the same time from bridge I am able to ping gateway and all the other ip successfully.

below is the configuration :

------------------------------

clock summer-time R recurring

ip subnet-zero

ip domain name xxxxxx

!

!

dot11 activity-timeout unknown default 15

dot11 activity-timeout client default 15

dot11 activity-timeout repeater default 15

dot11 activity-timeout workgroup-bridge default 15

dot11 activity-timeout bridge default 15

!

dot11 ssid AAAAAAAA

authentication open

infrastructure-ssid

!

dot11 network-map

!

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

encryption key 1 size 128bit 7 BBBBBBBBBBBBBBBBB transmit-key

encryption mode wep mandatory

!

ssid AAAAAAAA

!

speed basic-12.0 18.0 24.0 36.0 48.0 54.0

power local 50

station-role root bridge wireless-clients

rts threshold 4000

concatenation

no dot11 extension aironet

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

full-duplex

bridge-group 1

bridge-group 1 spanning-disabled

!

interface BVI1

ip address X.X.X.X Y.Y.Y.Y

no ip route-cache

!

ip default-gateway X.X.X.X

no ip http server

ip http authentication aaa

ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

ip radius source-interface BVI1

-------------------

Thanks

1 REPLY
New Member

Re: Wireless AP - Not able to ping default gateway from wireless

Does anybody had above such issue. Is there any config change to be done on the bridge side ??

Any help will be appreciated.

Thanks

310
Views
0
Helpful
1
Replies
CreatePlease to create content