I hv configued AP 1310 in Root bridge with client mode. BVI interface has been configured with static ip and the default gateway has been configured
Wireless client successfully get's the ip address from DHCP server on network through bridge but not able to ping the gateway or any other ip on the network.
Wireless client is successfully able to ping the bridge ip once it get ip address from dhcp server.
At the same time from bridge I am able to ping gateway and all the other ip successfully.
below is the configuration :
------------------------------
clock summer-time R recurring
ip subnet-zero
ip domain name xxxxxx
!
!
dot11 activity-timeout unknown default 15
dot11 activity-timeout client default 15
dot11 activity-timeout repeater default 15
dot11 activity-timeout workgroup-bridge default 15
dot11 activity-timeout bridge default 15
!
dot11 ssid AAAAAAAA
authentication open
infrastructure-ssid
!
dot11 network-map
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption key 1 size 128bit 7 BBBBBBBBBBBBBBBBB transmit-key
encryption mode wep mandatory
!
ssid AAAAAAAA
!
speed basic-12.0 18.0 24.0 36.0 48.0 54.0
power local 50
station-role root bridge wireless-clients
rts threshold 4000
concatenation
no dot11 extension aironet
infrastructure-client
bridge-group 1
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
full-duplex
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address X.X.X.X Y.Y.Y.Y
no ip route-cache
!
ip default-gateway X.X.X.X
no ip http server
ip http authentication aaa
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
-------------------
Thanks
