You can always use a 1242 in bridge mode with external antennas. You will need a NEMA heated/cooled enclosure for the ap unless that will be mounted indoors, lightning arrestor and LMR cable to extend the antenna if required and antenna mounting hardware. But with most systems, you will need line of site, so hopefully you have this. Antenna wise, you can go with a yagi at both ends.
It seems that if I will use 1310 with integrated antenna the price will be less than 1242. Is NEMA enclosure required for 1310 bridge. Secondly if I had to mount it in outdoor environment what all accecories I will require.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...