01-14-2014 10:37 AM - edited 07-04-2021 11:57 PM
Hi.
This may seem like a stupid question, but if i'm using 802.1x on my wireless network and using RADIUS/LDAP/ACS for authentication, do I need to configure any aaa commands on my access switches? It was my understanding that all traffic from the client is tunnelled back to the controller so this is not necessary?
Thanks.
Solved! Go to Solution.
01-14-2014 10:40 AM
No commands necessary on your switches. Your WLC has radius servers configured and the WLC will communicate with your radius.
Sent from Cisco Technical Support iPhone App
01-14-2014 10:40 AM
No commands necessary on your switches. Your WLC has radius servers configured and the WLC will communicate with your radius.
Sent from Cisco Technical Support iPhone App
01-14-2014 10:42 AM
That's what I thought! Thanks Scott, much appreciated.
01-14-2014 11:54 AM
No problem
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide