For 5 AP's you don't need the WLC at all. To run these in Autonomous mode will work just fine! For power options you could also use power injectors if there is no A/C outlet near the AP mounting location;
Cisco Aironet Power Injector (AIR-PWRINJ3) Cisco Aironet power injectors use the power supply that is available with Cisco Aironet 1240AG Series access points.
Antennas for both 2.4-GHz and 5-GHz radios are available and must be ordered separately. High-gain omnidirectional, narrow-beam directional, diversity, and nondiversity antennas are available for both operating bands.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...