cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
497
Views
0
Helpful
1
Replies

wireless issue

ahmedalshami
Level 1
Level 1

dear

i deployed Wireless access points with Two WISM i found some problem when some WorkStations Use (wireess adapter linksys )some Workstations is droped the signal and come On again this is the report from Controller

g

System Time

Trap

0

Thu Apr 3 15:07:55 2008

Client Deauthenticated: MACAddress:00:1b:77:2f:78:41 Base Radio MAC:00:0b:85:8e:f0:30 Slot: 1 Reason:Unspecified ReasonCode: 1

1

Thu Apr 3 15:07:28 2008

Client Deauthenticated: MACAddress:00:1b:77:2f:7a:e7 Base Radio MAC:00:0b:85:8f:0a:50 Slot: 1 Reason:Unspecified ReasonCode: 1

2

Thu Apr 3 15:07:28 2008

Client Deauthenticated: MACAddress:00:1b:77:2f:74:01 Base Radio MAC:00:0b:85:8f:0a:50 Slot: 1 Reason:Unspecified ReasonCode: 1

3

Thu Apr 3 15:01:18 2008

Coverage hole cleared for Base Radio MAC: 00:0b:85:8f:0a:50 and slotNo: 1

4

Thu Apr 3 14:58:23 2008

Client Deauthenticated: MACAddress:00:1b:77:2f:ab:2f Base Radio MAC:00:0b:85:8f:03:40 Slot: 1 Reason:Unspecified ReasonCode: 1

5

Thu Apr 3 14:58:19 2008

Client Deauthenticated: MACAddress:00:1b:77:05:99:8a Base Radio MAC:00:0b:85:8f:0a:50 Slot: 1 Reason:Unspecified ReasonCode: 1

6

Thu Apr 3 14:57:26 2008

Client Deauthenticated: MACAddress:00:1b:77:2f:ab:2f Base Radio MAC:00:0b:85:8f:03:40 Slot: 1 Reason:Unspecified ReasonCode: 1

7

Thu Apr 3 14:57:22 2008

Client Deauthenticated: MACAddress:00:1b:77:05:99:8a Base Radio MAC:00:0b:85:8f:0a:50 Slot: 1 Reason:Unspecified ReasonCode: 1

8

Thu Apr 3 14:56:29 2008

Client Deauthenticated: MACAddress:00:1b:77:2f:ab:2f Base Radio MAC:00:0b:85:8f:03:40 Slot: 1 Reason:Unspecified ReasonCode: 1

9

Thu Apr 3 14:56:25 2008

Client Deauthenticated: MACAddress:00:1b:77:05:99:8a Base Radio MAC:00:0b:85:8f:0a:50 Slot: 1 Reason:Unspecified ReasonCode: 1

1 Reply 1

Not applicable

Does other clients in the same vicinity receive good signal strength. If so upgrade the firmware of the adapters that are not working. If other clients are also dropping check the access point coverage in that area. Increase the signal strength if the need be. Also check for interfering sources with the help of softwares like netstumbler which might degrade the signal strength.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card