Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wireless issues in setting up an automatic download for a train system

Hi All,

I have been tasked to get a project back on track for a train locomotive system that has been installed, The system purpose is to automatically download logs from the train to a SFTP (SSH) Server once the train is in the vicinity of a Access Point.

The layout of the system is

Wireless Loco.JPG

I can connect up with a laptop and copy a file to the SFTP Server.

However the loco is unable to connect to the SFTP server.

I can see the 3201 connect to the AP

Tue Jul 24 07:45:38 2012

Client Authenticated: MAC Address:c8:4c:75:f6:8e:1e base Radio MAC:10:8c:cf:11:2e:80 Slot: 0 User Name:FMG_000002-CMU IP Addr:10.10.9.3 SSID:LocoCOMM

The 3201 Config is Attached


I cannot ping the CMU and it cannot ping anything

ifconfiglo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33212
capabilities=7<IP4CSUM,TCP4CSUM,UDP4CSUM>
enabled=0<>
inet 127.0.0.1 netmask 0xff000000
en0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500
address: 00:40:53:0e:13:e9
inet 10.10.9.1 netmask 0xffffff00 broadcast 10.10.9.255
inet alias 128.0.0.9 netmask 0xffff0000 broadcast 128.0.255.255
inet alias 10.11.167.105 netmask 0xffffff00 broadcast 10.11.167.255
/# route -n showRouting tables

Internet:
Destination       Gateway            Flags
default           10.11.167.1        UG    
10.10.9.0         link#2             U     
10.10.9.2         70:58:12:21:1e:e6  UH    
10.10.9.3         00:24:97:dd:a8:50  UH    
10.11.167.0       link#2             U     
10.11.167.1       link#2             UH    
127.0.0.1         127.0.0.1          UH    
128.0.0.0         link#2             U     
/# cat /etc/resolv.confnameserver 10.11.167.10

/# ping -n 10.11.167.10PING 10.11.167.10 (10.11.167.10): 56 data bytes
ping: sendto: Host is down
ping: sendto: Host is down
ping: sendto: Host is down

----10.11.167.10 PING Statistics----
10 packets transmitted, 0 packets received, 100% packet loss
/# ping -n 10.11.167.10 PING 10.11.167.11 (10.11.167.11): 56 data bytes
ping: sendto: Host is down
ping: sendto: Host is down
ping: sendto: Host is down

My question is, should the Cisco 3201 IP be in the same subnet as the AP and why I cannot see the Alias address on the CMU if the Cisco 3201 is in bridge mode

369
Views
0
Helpful
0
Replies