Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Wireless LAN controller 4402

Is it possible to config only 1 GB connection to 4402 LAN controller. Or must I use both Gb connectors ?

Because I have only 1 Gb port free on my switch.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Wireless LAN controller 4402

Hi Rene,

You can very well use only one gig port to connect to the switch. 2 ports can be used if you want to have por tchannel on switch and you want your controller to work with LAG.

But you can simply connect 1 port on switch to the controller and while configuring manamenet and ap-manager interface bind them to one physical port whichever you are using.

HTH

Ankur

*Pls rate all helpfull post

1 REPLY
Cisco Employee

Re: Wireless LAN controller 4402

Hi Rene,

You can very well use only one gig port to connect to the switch. 2 ports can be used if you want to have por tchannel on switch and you want your controller to work with LAG.

But you can simply connect 1 port on switch to the controller and while configuring manamenet and ap-manager interface bind them to one physical port whichever you are using.

HTH

Ankur

*Pls rate all helpfull post

306
Views
0
Helpful
1
Replies
CreatePlease to create content