Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wireless Mesh Frequent Parent Node Change

Hi,

the set-up is mesh, and we are facing problem because some MAP's frequently changed parent nodes, and sometimes resulted to sub-optimal route back to the RAP. the more disturbing issue is it happens almost every 30 minutes causing 4 RTO's that perceivable by end users on the remote site connected through a MAP. i have read on the preferred parent and snr smoothing but it seems it is not supported on the new 1550 AP's. please do share how you leap over this problem. thanks!

2 REPLIES

Re: Wireless Mesh Frequent Parent Node Change

Was a survey done prior to the install? Are there environmentally that are blocking the path when the issue occurs?

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: Wireless Mesh Frequent Parent Node Change

site survey has been done but no actual propagation test undertaken. is preferred parent configuration supported now on new aironet 1550? i have read a post that last year that it isn't, and it might be updated.

517
Views
0
Helpful
2
Replies