cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
433
Views
0
Helpful
3
Replies

Wireless Radio on C897 not coming up

mohanish12
Level 1
Level 1

Hi All,

 

I am trying to bring up Wireless on C897.

I have done the below config in the Ap

 

dot11 SSid test

vlan 1

 

interface dot11radio 0

ssid test

no shut

 

but its giving an error stating "*Mar  1 05:08:26.014: %DOT11-4-NO_SSID_VLAN: No SSID with VLAN configured. Dot11Radio0 not started."

 

 

Please if someone can help with this

 

 

 

 

 

3 Replies 3

Stephen Rodriguez
Cisco Employee
Cisco Employee

at a minimum you need to add the following to dot11 SSID test:

authentication open


you should also look into securing the SSID as well.

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Hi Steve,

 

Thanks for an early response.

I tried adding the authentication open but its still giving the same error.

 

I am attaching herewith the AP and router config.

Please if you can check and let me know where I am going wrong

Hi,

 

please if someone can help me out with this.

I need to bring up the wireless ASAP.

 

 

Review Cisco Networking products for a $25 gift card