I'm new to the CSC and relatively new to Wireless so please bare with me. I"ve got a WiSM in my 6509 that is setup for the most part. All communication between the Sup and WiSM is complete and correct. I have my controller interface set up as well (/24). My WLAN is setup for WPA-WPA2(Enterprise) AES/802.1x. I have another WLAN set up for regular WPA-PSK AES with a pre-shared key. My WLC code version is 220.127.116.11. I have all of my Radius and TACACS servers set up as well and my WLAN points to them for 802.1x security.
On my laptop i've setup my my SSID for EAP-TLS. My problem is I when I attempt to authenticate, I don't even get any log messages on my ACS server saying that i'm attempting to connect, and obviously I don't get an IP address. I can authenticate and obtain an IP from my other WLAN (WPA-PSK AES), so no problem there.
Is there a statement i'm missing that the WiSM may need to allow authentication through the radius server (or to even get to it)? I have the proper EAP-TLS certificate running on my laptop locally.
Any help that can be provided to allow me through using 802.1x would be greatly appreciated.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...