Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WiSM & AP Newbie

I have 2 WiSM modules, and plan to implement redundancy. I also have a bunch of AP's (1200 series). I've been reading documents on WiSM, and these are the points I got out of those documents, and I'd like to confirm:

-it appears that WiSM supports only LWAPP, is this correct?

- If yes, we have to convert our AP to LWAPP capable software, right?

Thanks

-B

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: WiSM & AP Newbie

Yes, WiSM only supports LWAPP.

Yes, yo have to convert AP to LWAPP AP

3 REPLIES
Bronze

Re: WiSM & AP Newbie

Yes, WiSM only supports LWAPP.

Yes, yo have to convert AP to LWAPP AP

Community Member

Re: WiSM & AP Newbie

Thanks.

Additional questions:

- Since WiSM has 2 4404 cards, its configurations should be similar to 4404, right? Any differences? Suggestions?

- What documents should be good sources for implementing this whole wireless network?

- What servers do I need? Win2K3 for DHCP & ACS? ...

Thanks.

Hall of Fame Super Red

Re: WiSM & AP Newbie

Hi B,

Here are some docs to help with this design and deployment;

Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml

LWAPP Upgrade Tool Troubleshoot Tips

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

This is an excellent doc;

Configuring a Cisco Wireless Services Module

http://www.cisco.com/en/US/docs/wireless/technology/wism/technical/reference/appnote.html

Hope this helps!

Rob

182
Views
5
Helpful
3
Replies
CreatePlease to create content