Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wism Bulk disable ssh

have controllers with software version 7.0.250.0

i found that config ap {telnet | ssh} disable Cisco_AP is only good for specific AP

how do i bulk disable SSH for all All APs?

 

 

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Global settings to enable

Global settings to enable/disable Telnet/SSH is only available in 8.0 and later. 

 

You'll need to configure each AP individually via GUI or CLI.  By default Telnet/SSH is disabled.

2 REPLIES
Hall of Fame Super Gold

Global settings to enable

Global settings to enable/disable Telnet/SSH is only available in 8.0 and later. 

 

You'll need to configure each AP individually via GUI or CLI.  By default Telnet/SSH is disabled.

The option is available only

The option is available only in version 8.0 and later.You need to configure each AP individually via GUI or CLI.  By default Telnet/SSH is disabled.

36
Views
0
Helpful
2
Replies
CreatePlease to create content