03-21-2007 11:49 AM - edited 07-03-2021 01:48 PM
Hi,
Anyone seen this error on a WISM modul befor,
----------------snip----------------
Message
Keepalive messages are lost between Master and Controller'172.31.228.8'.
Help
Keepalive messages are lost between Controller '172.31.228.8'and Master.Please check the controllers port configuration, any software or hardware incompatibility issues.
172.31.228.8 > Controller Properties
Misconfigured WiSM Controller #0
----------------snip----------------
WISM modul are placed in to 6509, directly connected,
Best Regards
Peter
03-21-2007 11:02 PM
Hi Peter,
Can you paste the output of "sh run | in wism" from your supervisor?
Regards,
Ankur
03-21-2007 11:45 PM
Hi Ankur,
sh run | in wism
wism service-vlan 9
shows the same on both routers,
Regards
Peter
05-14-2007 07:51 AM
Was there ever a resolution for this issue?
12-11-2008 11:04 AM
Check your etherchannel load-balancing config
It should be:
sh etherchannel load-balance
EtherChannel Load-Balancing Configuration:
src-dst-ip
to configure it:
show6506A(config)#port-channel load-balance ?
dst-ip Dst IP Addr
dst-mac Dst Mac Addr
dst-mixed-ip-port Dst IP Addr and TCP/UDP Port
dst-port Dst TCP/UDP Port
mpls Load Balancing for MPLS packets
src-dst-ip Src XOR Dst IP Addr
src-dst-mac Src XOR Dst Mac Addr
src-dst-mixed-ip-port Src XOR Dst IP Addr and TCP/UDP Port
src-dst-port Src XOR Dst TCP/UDP Port
src-ip Src IP Addr
src-mac Src Mac Addr
src-mixed-ip-port Src IP Addr and TCP/UDP Port
src-port Src TCP/UDP Port
12-10-2008 11:33 AM
Were you able to resolve this? What was the fix?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide