Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WiSM initial config

Okay so I have the initial config on the controllers but I cannot ping the management interfaces.

Well that is to say the controllers cannot ping the default gateway.

Is it a tagging issue across the trunk maybe?

(WiSM-slot2-1) >show interface summary

Interface Name Port Vlan Id IP Address Type Ap Mgr Guest

-------------------------------- ---- -------- --------------- ------- ------ -----

ap-manager LAG 778 10.65.0.7 Static Yes No

management LAG 778 10.65.0.6 Static No No

service-port N/A N/A 192.168.10.3 Static No No

virtual N/A N/A 1.1.1.1 Static No No

(WiSM-slot2-1) >

2 REPLIES
New Member

Re: WiSM initial config

yep, answered my own question. The native on the CAT side needed to be VLAN 1

Thanks anyway.

Silver

Re: WiSM initial config

Alternately, if 778 was the native vlan for the link, the configuration would be to untag the management and AP-Manager (vlan 0).

325
Views
0
Helpful
2
Replies
CreatePlease to create content