Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WISM not communicating with ACS Se

Hi, I am installing a pair of WISM's with 100 LAP's. The WISM's are configured as aaa clients on my ACS Se. And the ACS Se's are configured as radius servers on my WISM's. I want to back all wireless client authentication to the pair of ACS Se using dot1x LEAP. When I check the ACS Failed log I keep getting Authentication failed and EAP Type not configured messages. However the users and LEAP method is all setup on the ACS. The ACS's also provide TACACS authentication to my lan devices and these work ok. They seem to fail on any RADIUS authentication. Has anyone any idea on where I am going wrong? Any help would be greatly appreciated.

1 REPLY
Anonymous
N/A

Re: WISM not communicating with ACS Se

On the controller you just have to select 802.1x under layer 2 security. And on the ACS server, under global authentication setup ensure that LEAP is selected. And the user database should be created on the ACS. If all this is done, and the ACS server is reachable from the WLC, the authentication should happen without any issues.

138
Views
0
Helpful
1
Replies