Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WiSM redundancy/failover

Cisco documents mentions only up to tertiary WLC. The thing is each WiSM has 2 WLC 4404 cards. We have 2 WiSM modules. How do we configure the WiSM modules for redundancy/failover? -Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: WiSM redundancy/failover

Yes... same mobility group... so in case you have roaming between the A and B wlc's you will be okay.

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

Re: WiSM redundancy/failover

If you have two WiSM's in one chassis then I would set it up like this... no need for a tertiary:

WiSM 1 WLC 1 A

WiSM 1 WLC 2 B

WiSM 2 WLC 1 A

WiSM 2 WLC 2 B

Just break up the sections via floor, building or sections.

ex.

A = floors 1-3

B = floors 4-6

-Scott
*** Please rate helpful posts ***
Community Member

Re: WiSM redundancy/failover

With A & B being mobility group? -Thanks

Hall of Fame Super Silver

Re: WiSM redundancy/failover

Yes... same mobility group... so in case you have roaming between the A and B wlc's you will be okay.

-Scott
*** Please rate helpful posts ***
265
Views
0
Helpful
3
Replies
CreatePlease to create content