02-13-2012 11:48 AM - edited 07-03-2021 09:34 PM
Hi all,
Can someone explain me a differences in capabilities between WISM & WLC5500. Are there any differences or not ?
I know that hardware is diffrent so you don't have to explain me that thing.
Regards
Marcin
02-13-2012 12:01 PM
They are pretty much the same. the WiSM2 can do up to 1000 AP where the 5508 can only go up to 500.
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/at_a_glance_c45-652653.pdf hasn't been updated with the 7.2 additions yet.
Steve
02-13-2012 12:10 PM
Thx Stephen
02-13-2012 01:11 PM
the WiSM2 can do up to 1000 AP
I thought the WiSM-2 can support only up to 500 WAPs?
02-13-2012 01:14 PM
as of 7.2 it can do 1000
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp852173
Steve
02-14-2012 01:10 PM
as of 7.2 it can do 1000
H0ly shoes!
Thanks Stephen!
PS: Can I request if someone updates the WiSM-2 data sheet?
02-14-2012 06:06 PM
Lets be clear WISM and WISM 2 are two different part numbers and devices. The subject says WISM and 5508. A regular WISM will only do 300 (150 per board) 2 boards per WiSM blade.
But great point Steve 1,000 ... BANG!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: