02-13-2012 11:48 AM - edited 07-03-2021 09:34 PM
Hi all,
Can someone explain me a differences in capabilities between WISM & WLC5500. Are there any differences or not ?
I know that hardware is diffrent so you don't have to explain me that thing.
Regards
Marcin
02-13-2012 12:01 PM
They are pretty much the same. the WiSM2 can do up to 1000 AP where the 5508 can only go up to 500.
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/at_a_glance_c45-652653.pdf hasn't been updated with the 7.2 additions yet.
Steve
02-13-2012 12:10 PM
Thx Stephen
02-13-2012 01:11 PM
the WiSM2 can do up to 1000 AP
I thought the WiSM-2 can support only up to 500 WAPs?
02-13-2012 01:14 PM
as of 7.2 it can do 1000
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp852173
Steve
02-14-2012 01:10 PM
as of 7.2 it can do 1000
H0ly shoes!
Thanks Stephen!
PS: Can I request if someone updates the WiSM-2 data sheet?
02-14-2012 06:06 PM
Lets be clear WISM and WISM 2 are two different part numbers and devices. The subject says WISM and 5508. A regular WISM will only do 300 (150 per board) 2 boards per WiSM blade.
But great point Steve 1,000 ... BANG!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide