07-12-2007 03:52 AM - edited 07-03-2021 02:20 PM
Hi All,
I have installed a 1130ag for the first time and I can not bring up the wireless/radio interface?
I have it connected via http at the moment, and have tried to enable the radio through the GUI but it does not come up? (It normally comes up this way with with 1200's)
Can anyone suggest anything?
Many thanks,
Nathan.
UK.
Solved! Go to Solution.
07-13-2007 01:16 AM
Have you defined an SSID? If you haven't the radio won't come up.
07-12-2007 04:20 AM
What are you using for a power source? I have seen issues using older power standards. Do you have the some problem if you use the AC adapter?
-Doug
07-13-2007 01:16 AM
Have you defined an SSID? If you haven't the radio won't come up.
07-16-2007 02:03 AM
Thanks guys.
It was the ssid not being configured that caused the radio to not respond to the enable function.
All is well now, I remembered this after 30mins of frantic IOS blasting and trying various other stuff..DOH!!
Though all worked well and customer was very happy.
Nathan.
08-07-2007 07:17 PM
I've seen issues where CDP will prevent the interfaces from coming up. You might try disabling it on the switchport and the AP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide