As per your query i can suggest you the following solution-
Cisco Aironet wireless bridges are designed specifically for ease of installation and operation, minimizing administrative costs. The Cisco Aironet 1300 Series and Aironet 1400 Series products use the same Cisco IOS® Software as wired networks, providing network managers with a familiar experience and minimizing training and administrative costs.
Delivering the flexibility required by network operators today, both the Cisco Aironet 1300 Series and Aironet 1400 Series products are deployable in outdoor or harsh environments—saving the added expense of NEMA enclosures. Both support a variety of configurations, such as point-to-point or point-to-multipoint, as well as a choice of external or integrated antennas. To further meet deployment needs, the Cisco Aironet 1300 Series also can be configured as either an access point or a workgroup bridge (a workgroup bridge provides wireless connectivity to wired devices with an Ethernet port).
Unlike leased lines, which require a visit from a service provider, Cisco Aironet wireless bridges can be operational right out of the box. Furthermore, organizations do not have to rely on the phone company's technicians to maintain the lines in case of problems, because there are no lines to maintain. Cisco wireless solutions are designed to be flexible in order to meet continually changing business requirements. Cisco Aironet outdoor wireless products offer the following benefits:
• Scalability—Users can add additional channels for more capacity.
• Resilience in harsh environments
• Support for remote power for the Cisco Aironet 1300 Series and Aironet 1400 Series outdoor units
• Multiple mounting options
• Multiple antenna choices
• Intelligent networking features such as QoS and VLAN support
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...