I want to configure a WLAN (central WLC and APs in several branches) with a WLC 5760 and 2602 APs so that internal staff are routed (based on authentication) per branch directly at the AP or switch to a local VLAN. So that the traffic is not routed through the central WLC.
Unfortunately I can not find a Keyword or a tutorial for it?
Can you tell me if that works with the hardware and if yes, how (under what keyword I have to look)?
You can use 5760 as controller provided that all your branch AP connected as Local mode as oppose to FlexConnect. To do this you do not require any 3850 at your branch.. you can use whatever switches you currently have.
Only drawback is all your user/mgt traffic is Central Switching(which mean tunnel back to your 5760 from branch)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...