Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WLAN Question

Does anyone know if it is possible to configure a group of 10 access points in a building with 2 ssid's . Where the private ssid only uses the "A"radio and the public ssid can use the "a,b,or g " radio. Our Main facility uses a,b,g throughout the main campus. But I have a suspicion that there is to much cochannel interference on "b" and "g" radios causing my users to disconnect every so often. I want to test my theory by moving some of them over to the "A" radio. One of the problems I am having however is that My users take their laptops home quite often and they don't support the "A" radio and cant connect when they get home. So changing the client to only connect to the A radio is not an option either. Any suggestions would be appreciated.

Thanks,

Tony

Sent from Cisco Technical Support iPad App

1 REPLY
Hall of Fame Super Silver

Re: WLAN Question

Tony,

You can try to either use client band select on the WLAN or maybe even changing the radio policy on the WLAN to 802.11a only.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
203
Views
0
Helpful
1
Replies
CreatePlease to create content