Evening all, I'm trying to set up the above router with three seperate SSIDs, three different VLANs and three different rulebases. Can someone point me toward a template I can use or offer some advice?
I have a config that have been tested for the C871 router, which should be similar to the C877. I hope this helps. This is only for 2 SSIDs, but you can just keep adding to the set up for up to 10 SSIDs:
This is test sample for 2 vlans, vlan1 and vlan 10
both are BVI interfaces. 2 bridge-groups are being configured.
No cdp run globally, but enable cdp on FE ports for IP phones.
service timestamps debug datetime msec
service timestamps log datetime msec
logging buffered 51200 warnings
no aaa new-model
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 172.30.220.1 172.30.220.10
ip dhcp excluded-address 172.30.220.129 172.30.220.138