Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC-2006 and 1242 APs

Hello.

I have a 2006 with 2 1242 APs connected to it. The problem I have is the 2 APs keep rebooting. they come up, get a DHCP address, stay up for a minute or so and restart. The log on the controller shows this each time it happens:

Thu Apr 20 10:54:39 2006 [ERROR] spam_lrad.c 2544: Security processing of Image Data failed from AP 00:16:47:b2:0a:48

Thu Apr 20 10:54:39 2006 [ERROR] spam_crypto.c 653: Failed decryption of message from AP 00:16:47:B2:0A:48

Thu Apr 20 10:54:24 2006 [ERROR] spam_lrad.c 5973: Refusing image download to AP 00:16:47:b2:0a:48 - Unable to open file /bsn/ap//c1240

Any ideas?

Thanks

4 REPLIES
New Member

Re: WLC-2006 and 1242 APs

No ideas, but I am in the same boat. If I find a solution I will be sure to share. Just a note, on mine the problem happens with 1130's upgraded to lwapp.

New Member

Re: WLC-2006 and 1242 APs

Just wanted to see if you are using 3.2.78 on the controller. I was using that version and just moved to the newest (I had to contact support to get it) and it all works now.

New Member

Re: WLC-2006 and 1242 APs

Yes, same thing here, once we updated the controller, all worked fine.

New Member

Re: WLC-2006 and 1242 APs

I had the same problem with some 1231 APs with a 4402 controller. If you watch the APs console while it is rebooting, you'll notice that it can't get a certificate. I finally figured out that the time was different (wrong time zone) wrong on the controller compared to what I gave the APs when I upgraded them to LWAPP.

FYI

298
Views
0
Helpful
4
Replies