08-11-2013 08:35 AM - edited 07-04-2021 12:37 AM
What requisites are there for configuring three AIR-LAP1131AG-A-KP v03 LAPs with an AIR-WLC2006-K9?
the LAPs are on c1130-rcvk9w8-tar.124-10b.jda, the WLC is 3.2.78.0
What do I need to do to make this work?
Thank you!
08-12-2013 02:23 PM
Hello,
As per your query i can suggest you the following installation guide-
http://www.cisco.com/en/US/docs/wireless/access_point/1130/installation/guide/1130hig_book.pdf
Hope this will help you.
08-14-2013 05:36 AM
your WLC code is very old and out of support. You better upgrade the WLC.
Rating useful replies is more useful than saying "Thank you"
08-14-2013 03:58 PM
AP1130 is first supported in 3.1.5.9, so the firmware your WLC2006 is running on should be fine.
However, don't put too much faith in this version. As what Amjad as stated, it's fairly old and very "basic". It's good to learn about wireless but I wouldn't even think about using this version of firmware in production as it's got a lot of bugs and vulnerabilities.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: