Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

WLC 2006 & LAP1231 communication

HI,

I Have problems with AP authentication on the WLC. AP gets the IP from the DHCP but fails to load the image.

On the WLC log I get:

Sun Sep 3 21:49:51 2006 [ERROR] spam_lrad.c 2544: Security processing of Image Data failed from AP 00:17:59:67:76:80

Sun Sep 3 21:49:51 2006 [ERROR] spam_crypto.c 653: Failed decryption of message from AP 00:17:59:67:76:80

On the AP I get:

*Sep 3 21:54:27.750: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: COULD NOT DOWNLOAD NEW IMAGE SUCCESSFULLY.

*Sep 3 21:54:29.750: LWAPP_CLIENT_ERROR: not receive read response(0)

Any ideas ?

Thanks,

Vasil

3 REPLIES
Cisco Employee

Re: WLC 2006 & LAP1231 communication

Hi Vasil,

Can you please confirm which image your controller is running. Is it 3.2.78.0?

Also I have seen this error message some time due to image issue. Is it possiblr for you to upgrade your controller with the latest in 3.2 series incase you are running 3.3.78?

Regards,

Ankur

Cisco Employee

Re: WLC 2006 & LAP1231 communication

Hey Vasil,

I checked from your last post and you are running 3.2.78.0 so if possible upgrade your controller with the latest image in 3.2 train or you can also move to the 4.0 release.

So try upgrading your controller and I believe the problem will be resolved.

Regards,

Ankur

New Member

Re: WLC 2006 & LAP1231 communication

Thanks,

I thought of that. I just purchased all the equipment without the service plan, big mistake !

I don't have CCO (yet) so I can not access the new image files for the WLC2006. I am running 3.2.7.8.0 and the latest one is 4.0.179.8

Any alternative sources for the image files or I would have to wait for my order to be processed? I have a deadline of 12 hours to fix this.

Thanks,

Vasil

215
Views
0
Helpful
3
Replies
CreatePlease to create content