Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 2100 Ipv6 ready?

We have a 2100 cisco Wireless LAN Controller which manages 3 APs and  assign IP address to clients which connects via wifi.  Currently, we are  deploying dual stack IPv6 and our consultant stated that our current  controller does not support IPv6.

This is rather odd statement because there is an option to enable IPv6  in the advance tab of WLAN.  And sometimes clients (win7 and Mac OS X)  are getting v6 addresses, able to ping v6 sites, and reach v6 sites  successfully.   And other times, clients do not..or getting the v6  address for 10-15minutes, then unable to ping/reach v6 sites.

Our consultant is sticking by his words saying it does not support.   If  this is true, then clients should not be able to get v6 at all....not  sometimes and not other times; very inconsistent.

And what is ipv6 pass through?

What is ipv6 bridging?

Could you kindly enlighten me and shed some insight?  I'm not experience at all.  So, any assistance is greatly appreciated.

Everyone's tags (5)
2 REPLIES

WLC 2100 Ipv6 ready?

The 21xx is not IPv6 ready.  Meaning, that it does not accept an IPv6 address on it.  This isn't available until 7.2 code.

for the passthrough and bridging, take a look at this document

https://supportforums.cisco.com/docs/DOC-15667

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Hall of Fame Super Gold

WLC 2100 Ipv6 ready?

The 2500 is IPv6 capable when using the 7.2.X code. 

571
Views
0
Helpful
2
Replies